How Are Rife Manufacturers Compared?

[Mico Snook]

Hi Jeff,
Been reading your replys and also your replys to Mark Lipton which included you having to run fans to keep your machine cool. The pearl M+ states The ProGen 3 is the culmination of 23 years of extensive research by some of the best frequency specialists in the world. It generates frequencies up to 4,000,000Hz with stunning clarity and class-leading accuracy.
They don't have heat issues as you can run their equipment 24/7. If I read your information correctly your machine goes up to 40,000Hz with heat issues but they go up to 4,000,000Hz with no heat issues. Am I missing something?
Regards

[Jeff Garff]

Hello Mico Snook,

I am not going to give you a bunch of sales hype. We have been building instruments for almost 19 years. We use cooling fans in all of our instruments because of the power output. The GB-4000 outputs 3.7 watts not just 1/5^th of a watt therefore we use a cooling fan. The SR-4 outputs from 15 to 18 watts so we also use cooling fans with it. The MOPA is a plasma tube device which can output a maximum of 190 watts therefore we use cooling fans also. But we do not have overheating issues and if you want to run them 24/7 you certainly can. We do have customers who do this.

The information you have is old information and we are not limited to 40,000 Hertz with the MOPA. May 1, 2015 over 3 1/2 years ago we updated the MOPA so that it now has the same frequency range of 20,000,000 Hertz that the GB-4000 has. Our brochure has the specifications on it and if you go to www.gbgenerators.com you can download one or just read the specification listed on the site.

Regards,
Jeff Garff
jgarff@cut.net

Hi Jeff,
Been reading your replys and also your replys to Mark Lipton which included you having to run fans to keep your machine cool. The pearl M+ states The ProGen 3 is the culmination of 23 years of extensive research by some of the best frequency specialists in the world. It generates frequencies up to 4,000,000Hz with stunning clarity and class-leading accuracy.
They don't have heat issues as you can run their equipment 24/7. If I read your information correctly your machine goes up to 40,000Hz with heat issues but they go up to 4,000,000Hz with no heat issues. Am I missing something?
Regards