Hi Annie,
Thought I had disapeared didn't you, but you get that when you send people off to websites that takes them all day to read
Kind regards
Hi Annie,
Thought I had disapeared didn't you, but you get that when you send people off to websites that takes them all day to read
Kind regards
As Daniel Bergman so eloquently surmised most of us Forum frequenters fit neatly into the category of “health hacker.” This is not necessarily true in every circumstance.
I have spoken to a Forum member, Stephen Heuer, www.cocoonnutrition.org several times & consider him borderline brilliant regarding health supplement products – He has been in the field for more than ten years & his information regarding products useful against cancer is extensive.
Instead of researching hundreds of websites & products, contacting Stephen’s staff is a very efficient way to discover the alpha/omega currently available in health food supplements, vitamins, herbs, etc...
Frank
Last edited by Frank Verdi; 04-26-2007 at 15:03.
I seriously believe that a GB4000 can do what Rife did.
John Bedini is so far the only person that reproduced Rifelike results.
If Mr. Bedini have said that a GB4000 has germ killing qualities, than I expect him to tell the truth.
The only thing that is tricky is to use the right frequncies.
I have reasons to believe that the germs Rife killed with his machine, today have slightly differend frequencies.
Most people work from over fifty years frequency lists, and they may in some cases not be effective anymore.
Evolution and medicines like antibiotics may add to that.
This may also be a reason why some frequencies work and some not.
Next is, to have succes you need the right diagnose, and most of the people that work with a GB4000 are no M.D. and depend on other M.D.'s diagnose.
If this diagnose is not good, the frequencies may not work.
We all know this as a fact, and the result is often that you have to experiment with frequencies, starting from an original diagnose.
The reason why we all advise to use herbs and all kind of things, is simple: the more good stuff you get in your body, the easier it is to recover.
Anyone that think you can do it with only frequencies, may lose the battle in the end.
Frequencies for Osteomyelitis seem to work, Frequencies for Human Papilloma Virus not (not that trange since we know there are at least 18 differend types).
Rob
Hi everyone,
It has been my understanding since I started this research that the frequency generators are the basic equipment used for the destruction of the cells causing the problem and the use of natural suppliments (including water) are used to flush the toxins out of the body and regenerate the immune system.
What I am having a little difficulty with is why so many members of this Forum own/use more than one frequency generator
Have they bought cheaper (low power) ones to begin with only to find out that they did not perform as expected, therefore upgrading to better units, or is it a general lack of faith in any one of these devices that has caused them to buy multiple units so that they can try different ones on alternating days of treatment
Kind regards
Oh Hans, you make me smile!
One area where Electrotherapy isn't (in my opinion) very effective, is treating 'addiction'.
When my parents moved home about a year ago, my retired Med. Eng Dad could've opened his own online "Tools For Healing" store with what he'd accumulated over the past 50yrs.
@nnie
PS: Forgive me if I'm wrong ... but I think it's mostly "boys and their toys!"
Oh! After all those years and all those 'toys', by the time I got hooked on ONE Frequency Generator and a couple of zappers (I loan these out for folk to use between Freq. treatments, because I believe that works best), Dad mentioned that he'd learned, that no matter which Electrotherapy device or 'alternative' healing method one used, the KEY INGREDIENT was FAITH / BELIEF. If one (or when helping another, both parties) truly believed in the eventual efficacy of 'whatever' method was being used, the outcome would most often, in his experience result in success.
It's the "Law of Attraction" ... like attracts like!
Last edited by Annie Andrey; 04-27-2007 at 04:10.
Global distributor of Rife Frequency devices: http://www.RifeResonanceTherapy.net
PS: The machine depicted here, is NOT the one I personally recommend, nor make use of myself.
Distributor of Slimming (EMS / Faradic), Cellulite (Diathermy) machines, Microcurrent & Galvanic Non-Surgical Facelifting Systems & Overhead InfraRed Lamps - SA made & exported globally at factory prices! http://www.BeautyResonanceTherapy.com
Hi Annie
The use of frequency generators for addiction has never crossed my mind, thus I havn't done any research about it, for now I will just take you word on that issue Annie.
I am an avid believer in the use of audio frequenies/harmonics to heal the body by destroying the bad cells and balancing the immune system, I know that it CAN be done (using a powerfully suficient device) and the only question that remains is the correct frequency selection/s for any particular problem.
Herein lies the biggest hurdle for all of us. So far I must have compiled one of the largest libraries of frequencies on my PC known to mankind, (at least in my own mind) . Eventually I will correlate them all into my own database but for now I am still collecting more frequencies from various scources. I don't know if I will achieve anything by doing this but I hope to at least condense/reduce and cross-reference sufficient data to logically come up with some 'basic' frequencies to work with.
Kind regards
Hans The way I look at 'it', is that very often, wo/man in general tends to complicate things for her/himself ... often turning something very basic into a rocket science unnecessarily ... yet mostly only through enthusiasm and an innate sense of perfection and/or personal fulfilment.
Let's not forget though, that the most frequently used device for the LONGEST period of time, and WITH amazing results, was the Bio Solutions (now available under a vast array of different brand names) pre-programmed, CODED pad frequency generator. The majority couldn't decipher actual frequencies anyway, and cared LESS about these anyway, instead, just getting down to using these machines by selecting whatever sequence the originator had pre-programmed and listed on her recommended treatment list. THIS WORKED!
Then all of us 'smarty pants' came along ... and so, this therapy appears to become more 'n more complicated with time and more 'smarty pants' constantly coming on board.
If one only had a bicycle to get from A to B, one would naturally take the quickest, easiest route ... but when one has a car, the distance is often MUCH greater with many more obstacles en route.
ENJOY! ENJOY! No matter which route you choose to take dear Hans. Please keep what you have on file, and try to avoid doing what I did, by printing everything out ... I have a pile so high, and NEVER touch it.
Blessings,
@nnie
Global distributor of Rife Frequency devices: http://www.RifeResonanceTherapy.net
PS: The machine depicted here, is NOT the one I personally recommend, nor make use of myself.
Distributor of Slimming (EMS / Faradic), Cellulite (Diathermy) machines, Microcurrent & Galvanic Non-Surgical Facelifting Systems & Overhead InfraRed Lamps - SA made & exported globally at factory prices! http://www.BeautyResonanceTherapy.com
I first learned from electro medicine in 1993, thanks to Marjory Phillips, that was the Hulda Clark way.Originally Posted by Hans Gimpelj
Since I was unable to find the right electronical components to build my own zapper, I bought a frequency generator because H. Clark told in her books that would be a substitute for a zapper.
in 1994 I first learned about Rife, and in 1997 I first bought a machine programmed for Rife and Clark frequencies.
I learned the difference in Rife, Hoyland and Crane frequencies in 2003, the year we bought a GB4000.
The Rife Hall machine we bought in 1999, was bought more as a collectors item instead of a machine for use.
I made the zapper in 1994, but by than we notiuced already that the effect of the function generator was better than the lower power of the zapper.
Whit the function generator we pretty much had the same results as H. Clark tell in her books.
Our curiosity for the real Rife frequencies came later, but the results we have so far using a GB4000 next to a Global Wellness clone is obvious.
It looks like the effect of the GB4000 using the carrier wave has better results on most conditions than without the use of a carrier wave.
The signal of the GW clone is in fact not able to penetrate cells, and the signal of a radio wave does.
Because not all people have the money to buy a GW or GB my advice will be, make your own zapper, in the end it has remarkable results, but in all cases you have to stop poluting yourself, or it will not work. This is something that Hulda Clark also found out
We bought the GB4000 to prove for ourselves that Rife was right and that he was no evil magisian.
I can not prove what I do work, I have no microscope, but sometimes you just have to believe others like Raymond Rife and John Bedini like I did.
The results speak for them, but I do also have no succes at all. I think in that cases the frequencies may be wrong, or the people you try to help do not change any of their livestyle.
Rob
Hi Rob,
Ok, I can now understand your situation. It all makes good sense but I would like to hear from some other members as to why they have so many machines, could be though, that they are all in the same situation as you.
Anyhow you mentioned that cost was a large factor for some, there is a completely free PC-operated Frequency Generator, complete with list of ailments, explanations and frequencies all in the program. You just select the ailment from the list (hundreds) and the program sets itself up. It is fully automatic or programable, you can add/subtract frequencies, change the run time on any one or more frequencies, change wave types etc.
The only thing that you need is an amplifier and contact or ray tube. It recomends that you use asuitable amplifier that can reach the higher RF mode, it also has a RF clipping mode, starting from 20MHz you can lower it in stages to suit your amplifier. It mentions a suitable list of amplifiers, the GB-4000 is not on the list but the list is so far incomplete.
If you wish to check it out, here is the link.
http://www.heal-me.com.au/
Select FreX from the left-hand pane then scroll down on the right to access the download. I downloaded it last night and played around with it for a while just using my PC speakers as I do not have my GB-4000 yet.
The first thing that you will want to do when you open the program, is go to the button, bottom left of screen "view buffer" and change the setting to clear after selection, everything becomes much easier then.
Kind regards
I already tried frex and a dozen other software generators.
Without amplifier and wave corrector it seem useless. I have not seen any effect from pc generated frequencies.
Most have to work with square waves, and limited to the audio range, this make them only suitable for the less effective Crane frequencies.
Rob
I think a GB4000 even with amplifier is not strong enough to use a gas tube or bulb.
It is meant as a contact pad device, and for that the amplifier gives enough power, because there is minimal loss of power if it is directly aplied to the body.
Last edited by Rob Cassteele; 04-28-2007 at 02:48. Reason: Add GB comment
I believe that almost any halfway decent function generator can do what Rife did, if used properly. This means wiring electrodes to hands and feet. Pulsed DC with the proper polarity (usually negative to left hand and left foot, but there Are exceptions).
For those that can't afford a ~$2,000 frequency generator designed to run Rife frequencies there are good models for as low as $250. I know of a lady that has used one of these cheapies on many people with exceptional results. I think it's more the method than the machine.
I never post anything here and just noticed all these devices under my name. We only manufacture the M-Pulse 5000 magnetic pulser (not all these other devices). I'll have to find how to edit my profile and correct this.
There must have been a questionaire that asked what I've experimented with.
Hi Rob,
The GB4000 is not the only pad device that generates a carrier. The F125, F165 and F170 have mulitple channels and one of them can be used as an RF carrier.
Also, the FDS signal processor can be used with Frex (running on your PC) to generate clean square waves. I've head of fantastic results using Frex.
And this device also generates an RF carrier (only up to 350kHz, but according to reports this is working very well, maybe as good as the GB4000).
I've measured the frequencies using Frex and they are well within 1Hz up into the kHz range (on several PCs). This is much better than 1% accuracy and therefor fine for Rifing.
So for those on a tight budget there are cheap, effective alternatives
Dear Bill,
You are absolutely right!
But it can be done cheaper than frex (wich is share ware and not free.
I still have a PC with Blaster5 for connection to any amplifier.
But I studied hard on the Rife subject, and I have reason to doubt any machine or program based on the CAFL.
Once you have money to buy I would chose a GB 4000 over a Global wellness. If I did not have to travel that much I would have had a ray tube model, but the best alternative in my opinion is as you may know by noiw, the GB4000.
I know the F models, but for most people the programming is an issue, and stand allone F models lack in power, so you need a good amplifier=money.
The "F models are not cheap btw.
Rob
I think I posted enough on how to build a machine if you are pennyless, but if you save and want to try anything:
The GB4000 is the simplest to operate device with a carrier wave, and with the click of a button it is a Crane Audio device! But personally I think Rife and Hoyland were closer to the truth than Crane ever could come. This knowledge is the reason for my choice.
Hi Hans,
I do not have a great deal of knowledge of the GB4000 but understand it to a frequency generator, I can only presume that it has the ability to be programmed to also any frequency, the Bare /Rife is a plasma device and the frequency is via a Genyl card in a computer which seems to work well, the point that I was trying to make is that not all cancers are the same and there could be hundreds of frequencies other than the ones suggested on the lists available this could be caused by a number of factors that we know little about, without the aid of something to identify the right one (microscope) we are bushranging to a large degree and it is down to operator skill and a lot of luck to have a direct hit.
Terry C
Hi Terry,
I do believe that there are some differerences in the frequencies that are used between a beam device and a pad device, I may be wrong about this but I have somefrequency specs that I downloaded a couple of weeks ago and some refer to "beam" and others to "pad". I haven't had time to study and cross-reference them yet.
You mentioned the frequency 666 Hz, ( ) this one seems to pop up quite a lot, also used in Pain Manegment.
2128 Hz also comes in to play quite a lot for cancer treatment but I think that this is one of Rife's original frequencies.
Kind regards
This is not an original Rife frequency, it is an original Hoyland harmonic, and is divided by ten for use with Crane instruments.2128 Hz also comes in to play quite a lot for cancer treatment but I think that this is one of Rife's original frequencies.
The GB4000 is the only pad device that work with an RF carrier.
Rife divided cancers in 2 major chapters, BX, BY virus could cause it. Sarcoma and Carcinoma cancers that is what he looked for, and that could be anywhere in the body. This is why he never made a difference in lung or breast cancer, but he did look for BX or BY.
The freqencies for cancer in the list that comes with a GB4000 are the Rife high frequencies, the hoyland frequencies and the Crane frequencies.
The GB4000 may be build because of what Rife told Crane, and what can be read in the book by barry lynes The Cancer Cure That Worked.
Rob
The tube (beam) models generate the same as the GB4000, a beam has a lot of power loss in the air. This is why direct aplication with a lower power should do the same as a beam with high power.
Models that work with RF carrier are Rife/Hoyland based, and the other models are Craner audio devices.
Last edited by Rob Cassteele; 04-30-2007 at 15:18. Reason: Tube or pad why?
[QUOTE=Hans Gimpelj;6526]Hi Terry,
I do believe that there are some differerences in the frequencies that are used between a beam device and a pad device, I may be wrong about this but I have somefrequency specs that I downloaded a couple of weeks ago and some refer to "beam" and others to "pad". I haven't had time to study and cross-reference them yet.
You mentioned the frequency 666 Hz, ( ) this one seems to pop up quite a lot, also used in Pain Manegment.
2128 Hz also comes in to play quite a lot for cancer treatment but I think that this is one of Rife's original frequencies.
Kind regards [/Hans I have been using the GB4000/SR-4 combination for over a year now and have had one cancer success (the only one I've had to work on) with a friend who was scheduled to have both kidneys removed. I am an electronics technician and also have strong spiritual healing capabilities (replaced ten inches [25Cm] of dead colon having been given a max of 7 days to live in 2005. Having studied multiple Rife machines ovr the past 20 years, I very happily chose the gb4000. The photon tube devices I really don't have a huge amount of faith in to be honest and a friend who has two - one of which cost 7 times the amount of the Gb4000 agrees with me. It is ALL about finding the right frequency and that is the biggest limitation of all of these machines. When you find it - it WORKS. I would NEVER rely on any ONE thing though - cancer is an environmental disease - it can't exist unless you provide the environment for it to do so and from my research, cancer (supposedly) cannot exist in an alkaline state. So as well as the GB4000 treatment, I had my friend take 1 teaspoon of baking soda a day to get his body into an alkaline state. Was it the combination, was it the GB4000, was it the baking soda? Who knows and who cares - all that matters is that the urgent surgery that he was scheduled for in March of this year has been postponed indefinitely and he is feeling better than he has in years.]
Lisa Herbst (10-18-2011), Manjit Singh (11-24-2011)
Hi Hans,
Sort of, but it took nearly a month to find a frequency that worked, most of the cancer frequencies that are used 2008,2128 etc there was a reaction but I felt that there should have been more ( based on previous use) and searched for a frequency that produced more of a reaction and found that to be 666 in this case, 15 min at this freq actually, the cancer in the throat burst and caused the patient to be ill from both ends within 3 hrs, there was an MRI three days later and the lump had disappeared, what was left was a very sore throat for a few days, tests indicated that the remains of the burst were dead, all were surprised.
Terry C
Hi Terry,
You used a Bare/Rife machine for this 666 Hz treatment, is that correct , how does this compare with the GB-4000/SR-4 that I am buying, will it also work with this one.
Kind regards