Blog Comments

  1. Christopher Aguirre's Avatar
    Quote Originally Posted by Melissa Morris
    Hi, Frank. Thanks for sharing. My step dad has been in hospital all week and they found a golf-ball size mass on one of his lungs. They did a biopsy and found it to be cancer. He did a pet scan but we won't get the results until monday so we don't know what stage it is yet or if it spread.

    I am now on a quest to find the right rife machine for him to purchase and a protocol (frequencies, etc...).

    We have a Doug Coil machine for my husband's Lyme disease so I am familiar with Rife technology and have a strong conviction in it's healing abilities.

    However, cancer is new territory for me and I have NO idea yet what machine would be best to treat it. I feel the RIGHT machine could mean saving his life and choosing the WRONG machine would mean death so the pressure is on!

    And then there is the factor of using the RIGHT machine the WRONG way, which would mean death, so I need help in finding the correct treatment protocol once I find the RIGHT machine.

    My question is... What particular machine does he buy and WHAT company (or person) do we buy it from? (we don't have time to build something)

    THANKS! Melissa
    Melissa the Spooky2 XM Generator is a great machine and they have been having a lot of success with it at Spooky2.com! It is very inexpensive and they also have a great remote that you can purchase also so that you can treat him from anywhere because it uses scalar waves and theory of quantum entanglement. They also have a lot of great people on there and you can go to the downloads section and download Johann on Cancer and Treatment downloads for more information and those downloads will probably already have what your looking for in treatment. Johann is a great guy and will help anyone if you just join the forum there. Good luck my friend!

    Treating Lung Tumors
    Fibrosis of the lung
    27.5,220,410
    Dwell 360
    This removes the tumor if not the primary site. This worked in all three cases I
    treated. Run it about 10 times consecutively for about 14 days depending on the size
    of the tumor.
    Note that these sets do not use any cancer frequencies.
    Do not run tumor sets more often in an attempt to reduce the shrinking time.
    When you run tumour programs the tumor contracts and expands, and if you run it
    for too long, it will irritate the surrounding area and cause pain. I did it once with
    very painful consequences.
    If the lung was the primary site the tumor will reduce to about 10% of the size. To
    remove this last 10% run:
    Kidney Papilloma
    110,148,264,634,767,848,917,760,762,1102
    Dwell 180
    Run about 10 times consecutively for about two days.
    This was an interesting exercise that showed how deep one must delve to get to the
    true answer. A kidney tumor normally forms in the cervical – outer surface/mucous
    membranes – of the kidney. But cervicals are found in many places in the body and it
    would appear that the same principle applies: skin, vagina, penis, oropharynx, and
    anus, etc.
    On the web they concentrate on the sexual organs, and you could easily miss places
    like the kidney and even the lungs and others not even mentioned. You need to look
    at the principle involved to get to the truth. I am sure one will be surprised for what
    other tumors it would also apply. For instance, I tried to run Squamous Cell
    Carcinoma without success, but saw that papilloma is actually the cause of squamous
    cell carcinoma.
    It is also the cause of adenocarcinoma for which I had no program, and was one of
    the possible kidney tumors. From this I conclude that papilloma might be at the root
    of many tumors. When you see papilloma you normally think of warts – well, that's
    what I thought when I saw this name.
    Papilloma Virus:
    67265,64734,16970,9609,9258,5657,1051,1011,907,874 ,767,489,466,404,265,110,
    45
    Dwell 240
    After this there still remained a very thin tumor in the lungs that did not respond to
    Fibrosis of the Lung nor to Kidney Papilloma. I tried Asbestos Lung – 5111 – and that
    removed this last bit of the tumor.
    Updated 04-19-2014 at 15:37 by Christopher Aguirre
  2. Frank Clark's Avatar
    Tom,
    Sorry. Been away. I am writing a book on same subject. I will email you all info I have on Garth etc. call me 9083038137 or email me francisnclark@gmail.com.
    Frank
  3. Tom Basilio's Avatar
    Garth I am so sorry to hear of your loss and would be REALLY grateful if you would share what frequencies you are using. I was SO frustrated... cleared a friend of pancreatic cancer last year only to lose him to a bacterium accidentally introduced into his bloodstream while in hospital. I am currently working (1 treatment so far) with a liver cancer patient so any thoughts would be gratefully received.
  4. John Fackler's Avatar
    client has bladder cancer and am running frquencies for that thru a gb4000 and MOPA . can anyone tell me what to look for for signs of improvement? How soon to check to see if signs are improving or if treatment needs changed.
    He is showing no herx reaction. running cancer sets 115, 116, rife frequency 4 hr sweep and numerous other chanels. MOPA is set at 3.1 & 3.3 & 3.215 one every other day
  5. Michael Groneberg's Avatar
    Hallo Frank, I have today - November 06 2011- read your success story and I hope, your friend is still well.
    Since yesterday I have the diagnosis "pancreatic cancer". I know, it is a bad diagnosis and "normal medicine" mostly could not help. I will try to cure myself with frequencies and so I am looking for a specialised frequency bank. Can you please mail me the frequencies you took and with the kind of machine you worked. It would be very helpfull for me.
    My mailadress is michael@groneberg.org.
    Thanks a lot Michael
  6. Christopher Conkey's Avatar
    Hi Frank,

    Would love to know Garths protocol, especially his diet. You mention no Fructose, which I find interesting. More detail about what he did and did not eat would be wonderful.
  7. Frank Clark's Avatar
    Hi, Melissa,
    Sorry to hear the news. We always expect the worst don't we. I hope all of your worries are for nothing.
    To answer your question, I bought Resonant Light Technology's (RLT's) PERL device and three of their ProGen II's (PGII). The PGII's come pre-programmed with 40 banks of frequencies. Buying three PGII's cut the session time by 1/3. Sessions can take 2 hours apiece. This way we can run 3 banks in just 2 hours. Type into the PGII the number of the bank you want then sit back and relax. As I stated earlier, we used Bank 1 (carcinoma) and Bank 2 (sarcoma) and I created a unique supplemental Bank of frequencies gleaned from Johann Stegman's work (he successfully eliminated pancreatic cancer in South Africa and is helping yet another patient) and I created yet another bank from page 454 of Nenah Sylver's "Rife Handbook" with her liver fluke frequencies piggybacked onto it for good measure. Here is RSL's link: http://www.rifetechnology.com/about/index.htm
    I highly recommend them. Good service for hardware, software and clinical info.
    There is another man who has carcinomas near his lung and esophagus. His tumors shrank 33% in 6 weeks as of last PET scan. Next scan in 2 weeks. We expect big things (i.e. little tumors) out of that scan. As far as doing anything dangerous, I don't see how. Mistakenly the machine ran a _ _ backwards for the past 6 months and it STILL beat Garth's stage 4 pancreatic carcinoma (luckily I placed a mirror "behind" the machine which reflected some frequencies). Heck! The machine should have beat it in 3 months instead of 6! One thing. Garth was so successful at shrinking his 9 inch pancreatic tumor (in the body of the pancreas) down to 1 inch (not cancerous anymore) and his 4 inch tumor in the tail (now gone completely) that his blood supply to his stomach and spleen was cut off, backed up and burst major blood vessels at the site of tumor invasion. He bled out but luckily was in a hospital (or he would have died). The doctors patched him up, released him in three days and he resumed Rife treatment to a successful conclusion. Incidentally, I used a friend's Doug Coil for one year on myself and my disabled son for lyme before I bought my PERL. This man asked me over a year ago for advice about IV Rocephin treatment because he heard my whole family did it. I told him to read Bryan Rosner's book "Lyme Disease and Rife Machines" first. He did and asked how he could get a Rife machine. I downloaded Doug Maclean's on-line "Doug Coil" video, burned it to a DVD, gave it to him. He is an amateur inventor and, using this DVD, built himself a Doug Coil in 3 weeks for @$1,600 and used it to regain his health. Previously, he was disabled and could not lift a cup of coffee. Now he works in a machine shop lifting hundreds of pounds of metal and doing fine motor adjustments. This technology works, folks!! Anyway, back to possible dangers. Make sure the tumor has not invaded large blood vessels or you may spring a leak as the tumor shrinks. Ask the doctor which scan to use to verify this. By the way, Garth also had 8 cancerous lesions in his liver. He is down to one lesion and it is not cancerous because there is "..no evidence of hypermetabolic foci..." in Garth's body. Don't let anybody soft-soap his success. There are different "flavors" of pancreatic cancer and some @15% respond well to surgical resection. Garth's pancreatic cancer, however, was the worst kind i.e. adenocarcinoma. He was told he would be dead inside of six months (92% are after diagnosis). That was July. E-mail me for any and all of my banks and protocols. Good luck and don't worry.
    Updated 08-19-2011 at 18:53 by Frank Clark
  8. Melissa Morris's Avatar
    Hi, Frank. Thanks for sharing. My step dad has been in hospital all week and they found a golf-ball size mass on one of his lungs. They did a biopsy and found it to be cancer. He did a pet scan but we won't get the results until monday so we don't know what stage it is yet or if it spread.

    I am now on a quest to find the right rife machine for him to purchase and a protocol (frequencies, etc...).

    We have a Doug Coil machine for my husband's Lyme disease so I am familiar with Rife technology and have a strong conviction in it's healing abilities.

    However, cancer is new territory for me and I have NO idea yet what machine would be best to treat it. I feel the RIGHT machine could mean saving his life and choosing the WRONG machine would mean death so the pressure is on!

    And then there is the factor of using the RIGHT machine the WRONG way, which would mean death, so I need help in finding the correct treatment protocol once I find the RIGHT machine.

    My question is... What particular machine does he buy and WHAT company (or person) do we buy it from? (we don't have time to build something)

    THANKS! Melissa
  9. Frank Clark's Avatar
    Garth's latest cancer marker is 492 (down from 515 most recently and down from 6000 initially). Garth nearly died because Rife treatments shriveled and collapsed his tumors which had wrapped themselves around aortic blood supply to his spleen and stomach. This constriction of blood flow caused blood vessel ruptures and he nearly bled to death. Garth has since recovered, resumed chemo and Rife treatments and continues to do well. He has outlived his death date by one month and thrives.
  10. Annie Andrey's Avatar
    WELL DONE Frank!
    Please keep us posted on Garth's progress.
    ~@nnie~