View Full Version : How did you find this forum?
Peter Walker
02-01-2006, 17:28
Welcome to the Rife Forum. Please inform us how you heard of the Rife Forum.
After taking part in this poll, I suggest you read the message "Welcome to the Rife Forum (http://www.rifeforum.com/forum/showthread.php?t=899)"
Barbara Ramirez
03-15-2006, 05:22
:smile: Hi peter I have not been on this site for a long time, i'm not sure how to use it as of yet. I have questions about my Rife light tube and I'm not sure how to go about asking them or to whom I should address them to. Can you give me some advice on this matter. I signed up as a trusted member back in 2004 as you know and I want to be active in this forum.
Welcome to the Rife Forum. Please inform us how you heard of the Rife Forum.
After taking part in this poll, I suggest you read the message "Welcome to the Rife Forum (http://www.rifeforum.com/forum/showthread.php?t=899)"
You sent me an email informing me of the site now being back on line. I'm not experienced with using it as of yet so this is a test email to see if you will reply.
I have a few questions I would like to ask in regards to some entries and time frame for the use of my Rife light tube.
Another question I have is: Do you know how I can buy Nina Silver's latest handbook of Rife Frequency Healing? I have lost contact with her in New York.
I enjoy my machine very much and use it often for myself. I am a massage therapist.
Your reply will be appreciated
Sincerely
Barbara Ramirez in California U S A
p/s are you located in Germany? :smile:
Peter Walker
03-15-2006, 08:42
Hi Barbara,
welcome back to the forum.
Questions related to light tubes can be placed in the Rife Plasma Devices (http://www.rifeforum.com/forum/forumdisplay.php?f=7) section.
To learn how to use the forum, I suggest reading the messages in the Forum Announcements (http://www.rifeforum.com/forum/forumdisplay.php?f=11) section and you can practice posting in the Test Messages (http://www.rifeforum.com/forum/forumdisplay.php?f=63) section.
Nina Silver has changed her name to Nenah Sylver and you will find a link to her website in the links section of this forum. (http://www.rifeforum.com/links/browselinks.php?c=3)
Finally, you asked if I live in Germany. Yes, I live in the beautiful city of Cologne (Germans call it Köln).
Rick Davies
07-17-2006, 21:54
My friend, Gary Aardal, suggested I used the website listed in the manual he obtained when he bought his 2nd Rife/Bare Beam Ray Device kit.
Rob Cassteele
08-17-2006, 05:08
I tought it was FutureTechInc. (http://www.futuretechtoday.com/)
Nancy Panting
10-31-2006, 17:13
I found this through Yahoo Groups and I was so happy to find it listed there.
Anna Hunter
01-25-2007, 05:05
I found it through a web search on the Rife machine..
I must say I love this forum..It is such a wonderful tool..
Hey Peter,
I used to live in Koeln :lol:
Roy Moquin
04-10-2007, 03:35
First I found the story of Royal Rife, then I became very interested in the technology... even more so when I realized that so many device designs existed and most have valid results even with the minimal devices:idea: .
my search for building instructions and frequencies found this forum listed almost everywhere I went.
I believe rense.com, rt66.com and some others where the first places that lead me here.
Rosie Masini Pieralli
07-21-2007, 03:48
Friends of mine bought the FSCAN 2 and so I checked out the Royal Rife website. Then I did a search on the frequencies and found this forum.
Peter and Anna, I used to live in Nuernberg. Any idea how I can find someone with a scanner in Frankfurt/Oder? And can it be used with a pace maker?
Rob Cassteele
07-22-2007, 17:56
Friends of mine bought the FSCAN 2 and so I checked out the Royal Rife website. Then I did a search on the frequencies and found this forum.
Peter and Anna, I used to live in Nuernberg. Any idea how I can find someone with a scanner in Frankfurt/Oder? And can it be used with a pace maker?
No! You can not use any pad device if you have a pacemaker!
So be carefull.
Rob
Marie Wasilik
08-05-2007, 01:57
I purchased a "model A" Rife Machine from JWLABS in California. One of their websites is staytuned.ws Here I found the link to the RifeForum.
Or it might have been from the JWLABS site. Glad I found ya!
Cindi Kirkman
11-13-2008, 18:30
Wow, I think I got here by way of an old Rife listserv I was involved in, but I can't remember exactly. When I logged in today it said I hadn't been here since 2004, so my memory is a little faint. My interest was peaked again recently when I talked to an acquaintance with Lyme Disease and I want to get some information to pass on to her.
Lynne Aloise
12-02-2008, 01:42
A friend who had a rife machine recommended this forum. And you are linked to on the natmedtalk forums and the healthiertalk forums:
question about pyroenergen (http://www.natmedtalk.com/general-discussion/1250-pyroenergen.html)
question about falaria (http://forums.hsibaltimore.com/general-health-topics/4235-does-anyone-have-experience-treating-falaria.html)
Daniel Bergman
12-07-2008, 05:19
I heard about a Rife machine on the healthier talk forum and wondered what it was all about?
After reading extensively about Royal Rife I knew he was a genuine genious and had to find out whether this frequency thing could be replicated today. Since my wife had Lyme disease and yet no official diagnosis, I had to find treatment methods that we could do ourselves.
While we cannot confirm that an official Rife machine is made today, there are some devices inspired by his story that can help with various health problems.
I have been surprised by some of the results of various experiments using frequency treatments. Hopefully someone will duplicate Royal Rifes success someday, but even the results we can get today are quite impressive.
Dan
Rob Judd
02-19-2009, 19:33
I turned left at Albuquerque ...
Doreen Clysdale
09-12-2009, 16:46
Google searching for information on Rife frequencies.
John Holland
02-15-2010, 22:36
I have been reading and studying Rife sites for years and I think I saw a mention of the rifewiki on rife.de and that led me here.
Denise Lochtenbergh
02-22-2010, 04:42
I found a RifeForum.com public forum post and reply by searching for further information on the GB4000.
Brian Dickinson
03-12-2010, 13:18
I found a link on www.keelynet.com (http://www.keelynet.com) and that showed video footage of the rife story. It was so interesting that I then followed and an every link I could that had rife in the title. Eventually it led me to rife.de and here
Jeff Rubin
03-12-2010, 13:53
I found it through Rosner's book Lyme Disease and Rife Machines.........
Pam Winters
03-12-2010, 14:16
I have been a member of this site for some time now - but never could successfully find out how to post - so I finally got here, to a place where I could. Hope this works. I love this site and all its info.
Chaieomie H. O'Connor
04-02-2010, 19:35
Hi there, I found it via Bryan Rosner's Rife and Lyme book (excellent read) and I found it just in time as I was getting a little lonely with myself, my machine and I. I didn't realise the large community that existed and I'm grateful Peter that you are doing this to keep us together and for keeping the knowledge, research and experiences flowing in real-time. I've also joined a few Rife and Tesla appreciation groups on facebook.
I still don't really know how to navigate the site - it does seem a little difficult for the lesser technically able - but with more time I'm sure I can get the hang of it.
Cheers,
Chaieomie
Jordan DeJonge
09-04-2011, 06:51
i found this when a co-worker said that I needed to get on this forum and get involved with more like minded people seeking the truth behind therapeutic uses for frequencies. I wanted to check out other things then what i was using as my job as an ondamed technician
Andries Loubser
12-22-2011, 16:53
A Google search on Rife frequencies brought me to this forum. I'm glad I did and hope to find lots of answers for all my questions.:smile:
Deanna and Tom Speck
12-27-2011, 03:07
Search on Google gave me the Rife forum. The Rife forum gave me the most info and now I am very glad iI joind Thank's Peter for getting this all together
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.