Diane Blackburn
03-12-2010, 10:57
On the 29th of January 2010 we received a PERL Resonant Light Machine (Phorle – ProGen II 4050) from Resonant Light Technology Inc in Canada. We purchased it for our mother who had cancer. Unfortunately we were too slow in acquiring it and she was unable to use it by the time it arrived. We live in the UK. The details are as follows:
PERL Technical Specifications
Size 13.3125''W x 5.5''H x 17.375''L. Weight 17 pounds
Power: Built to either 110/120 or 220/240 VAC
Case: #14 gauge aluminum
Calibration: Factory set to 100 watts output +/- 5% @ 9999 Hz. SWR: 1.5 or less
Tube: Leaded glass, 100% Argon, 20 Torr
Tube output: 60 watts – typical
Tube ignition: Instantaneous – low temperatures and non-use may affect ignition speed
Power consumption: 6.3 A at 110V (693 W) 4a at 220V(880W) max. Requires a dedicated outlet – not shared
Built in chronometer
Device hour rating: 3000 plus hours conditional upon humidity, dust and power supply
Signal output: 1 to 999,999 Hz square wave @ 10 – 90 % modulation, 3.5 vpk-pk
Carrier frequency: 27,125,000 Hz (+/- .002%)
U.S. Patent Nos. # 5,908,441 and # 6,221,094
ProGen II 4050 Specifications:
40 programmable banks permits numerous frequency sets
50 base frequency levels for each bank. Each of the 2000 levels (40x50) can be either a single frequency or a wave packet
Frequency range is 1Hz to 999 999 Hz in 1Hz increments
- Six (6) digit frequency resolution (e.g. 100.001 Hz, 1000.01 Hz, 10000.1 Hz).
- Note: decimal points are not available for wave packet programming
Duration for each frequency: from 1 second to 59 minutes, 59 seconds
Output: 3.5 VPK-PK fixed, 0 – 14 VPK-PK variable
Aux connector: 4 pin audio connector for both signal and power
Display: Dot Matrix LCD with 5X7 dot 16-character 2 line panel, which incorporates a ROM based generator and RAM based LSI microcontroller. Yellow/green transflective type. Display contract is internally adjusted.
Dimensions: 5.625''W x 6.125''L x 1.4375''H
Weight: 485 grams
Accurate to within 0.001 Hz
Ability to run banks consecutively
Select a pulse rate of 1 to 1000 Hz in 1 Hz increments
Output signal: Sine, Triangle or Square wave
Duty cycle may be selected from 10% to 90%
Transfer one bank at a time or all banks consecutively to another ProGen II
Compatible with RLTi ProGen Wizard computer software
Saftey feature – 4 pin audio connector. When used to power the ProGen II, the 4-pin connector overrides the BNC output, eliminating the possibility of damage to the PERL by defaulting to the manufacturer's preset 3.5 VPK-PK
Some of the above mentioned features are designed for research only
Compatible with other devices, or equipment
RS232/USB support and adapter
The machine had one user before ourselves and was originally purchased in June 2009. It was returned to the manufacturers for resale and underwent all of the necessary refurbishment. We paid $5,082.50US (£3,378.58 GBP) and this included:
1 PERL Refurbished 220V
1 U Tube Assembly - 20 Torr
Connection cables (suitable for UK)
Instruction manual
Shipping and Handling
We also had to pay clearance administration plus 17.5% VAT of £647.02, totalling £4025.60. As we had no more than 4 hours use of the machine, we are putting up an asking price of £3,700. Please email me at dianedidier@aol.com (dianedidier@aol.com) if you are seriously interested.
PERL Technical Specifications
Size 13.3125''W x 5.5''H x 17.375''L. Weight 17 pounds
Power: Built to either 110/120 or 220/240 VAC
Case: #14 gauge aluminum
Calibration: Factory set to 100 watts output +/- 5% @ 9999 Hz. SWR: 1.5 or less
Tube: Leaded glass, 100% Argon, 20 Torr
Tube output: 60 watts – typical
Tube ignition: Instantaneous – low temperatures and non-use may affect ignition speed
Power consumption: 6.3 A at 110V (693 W) 4a at 220V(880W) max. Requires a dedicated outlet – not shared
Built in chronometer
Device hour rating: 3000 plus hours conditional upon humidity, dust and power supply
Signal output: 1 to 999,999 Hz square wave @ 10 – 90 % modulation, 3.5 vpk-pk
Carrier frequency: 27,125,000 Hz (+/- .002%)
U.S. Patent Nos. # 5,908,441 and # 6,221,094
ProGen II 4050 Specifications:
40 programmable banks permits numerous frequency sets
50 base frequency levels for each bank. Each of the 2000 levels (40x50) can be either a single frequency or a wave packet
Frequency range is 1Hz to 999 999 Hz in 1Hz increments
- Six (6) digit frequency resolution (e.g. 100.001 Hz, 1000.01 Hz, 10000.1 Hz).
- Note: decimal points are not available for wave packet programming
Duration for each frequency: from 1 second to 59 minutes, 59 seconds
Output: 3.5 VPK-PK fixed, 0 – 14 VPK-PK variable
Aux connector: 4 pin audio connector for both signal and power
Display: Dot Matrix LCD with 5X7 dot 16-character 2 line panel, which incorporates a ROM based generator and RAM based LSI microcontroller. Yellow/green transflective type. Display contract is internally adjusted.
Dimensions: 5.625''W x 6.125''L x 1.4375''H
Weight: 485 grams
Accurate to within 0.001 Hz
Ability to run banks consecutively
Select a pulse rate of 1 to 1000 Hz in 1 Hz increments
Output signal: Sine, Triangle or Square wave
Duty cycle may be selected from 10% to 90%
Transfer one bank at a time or all banks consecutively to another ProGen II
Compatible with RLTi ProGen Wizard computer software
Saftey feature – 4 pin audio connector. When used to power the ProGen II, the 4-pin connector overrides the BNC output, eliminating the possibility of damage to the PERL by defaulting to the manufacturer's preset 3.5 VPK-PK
Some of the above mentioned features are designed for research only
Compatible with other devices, or equipment
RS232/USB support and adapter
The machine had one user before ourselves and was originally purchased in June 2009. It was returned to the manufacturers for resale and underwent all of the necessary refurbishment. We paid $5,082.50US (£3,378.58 GBP) and this included:
1 PERL Refurbished 220V
1 U Tube Assembly - 20 Torr
Connection cables (suitable for UK)
Instruction manual
Shipping and Handling
We also had to pay clearance administration plus 17.5% VAT of £647.02, totalling £4025.60. As we had no more than 4 hours use of the machine, we are putting up an asking price of £3,700. Please email me at dianedidier@aol.com (dianedidier@aol.com) if you are seriously interested.